Mechanism of metal fatigue and its application to fatigue analysis using FEM (finite element method) and life assessment/fatigue-resistant design | newji
部品・製品の製作

その部品・製品、
作れる会社を探します。

図面からの部品の手配、試作、OEM・ODM。協力会社の中から合う会社を探して進めます。

OEM/ODM生産を見るOEM/ODM生産のページへ

投稿日:2025年7月7日

Mechanism of metal fatigue and its application to fatigue analysis using FEM (finite element method) and life assessment/fatigue-resistant design

Understanding Metal Fatigue

💡 こうした調達・受発注の属人化、Newji one なら「ひとつの画面」で解決。見積依頼から発注・進捗・承認までAIが下支えします。
サービス資料を見る(無料)→

Metal fatigue is a phenomenon that occurs when a material is subjected to repetitive stress or strain, leading to its structural failure over time.
This condition is akin to the way repetitive bending of a paperclip eventually causes it to break, even if each individual bend is not enough to harm it.
The failure is usually sudden and can happen without any prior warning, making it a critical factor to consider in the design of materials and structures.

Causes of Metal Fatigue

Metal fatigue is primarily caused by cyclic loading, which refers to repeated application of stress or strain.
Such loading can cause minute cracks to form at a microscopic level within the metal.
Over time, these cracks may propagate, leading to a complete fracture.
Factors influencing metal fatigue include the amplitude of the stress, environmental conditions like corrosion, surface quality, and the material’s inherent metallurgical properties.

Stages of Metal Fatigue

Metal fatigue typically progresses through three stages.
The first stage is crack initiation, where small cracks begin to form due to cyclic stress.
In the second stage, crack growth takes place where these cracks expand slowly with each cycle.
Finally, the rupture or failure stage occurs when the cracks grow to a critical size, resulting in sudden structural failure.

Application of FEM in Fatigue Analysis

Finite Element Method (FEM) is a powerful computational tool used widely in engineering to analyze and predict the behavior of materials under various conditions.
When applied to fatigue analysis, FEM helps in simulating the material’s response to cyclic stresses and predicts where and how fatigue might occur.
This method involves the division of the structure into finite elements and applying loads to simulate real-world forces.

Advantages of Using FEM

The use of FEM in fatigue analysis offers several advantages.
Firstly, it enables highly accurate predictions of fatigue life by considering complex variables such as geometry, loading conditions, and material properties.
The method also helps in identifying the critical areas prone to fatigue, which are crucial for making informed design decisions.
Furthermore, FEM allows for the simulation of different scenarios to optimize designs for improved fatigue performance.

Steps in FEM Fatigue Analysis

Fatigue analysis using FEM involves several key steps.
Initially, the geometry of the component needs to be defined and discretized into finite elements.
Next, material properties, loads, and boundary conditions are applied.
The simulation is then performed to assess the response of each element to cyclic loading.
Post-processing involves analyzing stress-strain results to identify potential fatigue sites and estimating the fatigue life of the component.

Life Assessment and Fatigue-Resistant Design

Predicting the fatigue life of a component is crucial in avoiding failures and extending its operational life.
Life assessment involves using fatigue analysis results to estimate the number of cycles a component can endure before failure.
This information is vital for maintenance planning and decision-making related to replacing or strengthening specific parts.

Strategies for Fatigue-Resistant Design

To enhance the fatigue resistance of metal components, several strategies can be employed.
These include selecting materials with high fatigue strength, optimizing the geometry to reduce stress concentrations, and improving surface quality through processes such as polishing and shot peening.
Additionally, employing advanced materials like composites and conducting regular inspections can further aid in mitigating the risks associated with metal fatigue.

Importance of Fatigue Testing

Fatigue testing is an essential aspect of fatigue-resistant design, providing empirical data on a material’s behavior under cyclic loads.
Such testing helps validate FEM simulations and design assumptions, ensuring reliability and safety.
Through various testing methods, engineers can gain insights into the fatigue limits of materials and use this information to refine designs accordingly.

Conclusion

Understanding the mechanism of metal fatigue and its implications on engineering design is crucial for developing durable and safe structures.
Utilizing tools like FEM for fatigue analysis offers significant advantages in predicting and mitigating fatigue failures.
By incorporating strategies for fatigue-resistant design, engineers can enhance the longevity and performance of metal components, preventing catastrophic failures and ensuring structural integrity.

WHITE PAPER

この記事の理解を深める
無料ホワイトペーパーをプレゼント

製造業の現場で使える実務資料(PDF)を無料でお届けします。"こんな資料が届きます" ↓ 下のボタンからどうぞ。

FREE DOCUMENT — サービス資料(PDF・無料)

製造業の見積・受発注クラウド
「Newji one」とは

Newji one は、製造業の調達・受発注に特化したクラウド/AIエージェント。見積依頼・発注書作成・進捗管理・承認をひとつの画面に集約し、AIが比較と異常検知を担当。最後の「GO」だけ人が押す仕組みです。

  • 見積〜発注〜納期を一元管理。催促・転記のムダをゼロに
  • AIが相見積もり比較と異常検知。あなたは判断だけに集中
  • 取引先は「招待」で完全無料。自社コストだけで取引先ごとデジタル化

※ 取引先から招待された企業様は完全無料でご利用いただけます

NEWJI総研

購買・調達や設計・品質の実務を、
研修テキストと実務書式にまとめています。
無料サンプルで中身を確かめられます。

NEWJI総研の資料を見る

OEM/ODM 生産委託

アイデアはある。作れる工場が見つからない。
試作1個から量産まで、加工条件に合わせて最適提案します。
短納期・高精度案件もご相談ください。

加工可否を相談する

AI/DX支援

見積・発注、紙・FAX、品質記録など、
人に頼って回っている業務を、AIと仕組みで回る形に。
まずは無料でご相談ください。

AI/DX支援を見る

見積・発注クラウド Newji one

受発注が増えるほど、入力・確認・催促が重くなる。
受発注管理を“仕組み化“して、ミスと工数を削減しませんか。
見積・発注・納期まで一元管理できます。

機能を確認する

You cannot copy content of this page