Initial EMC/EMI Design: Key Points of Layout, Shielding, and Filters | newji
部品・製品の製作

その部品・製品、
作れる会社を探します。

図面からの部品の手配、試作、OEM・ODM。協力会社の中から合う会社を探して進めます。

OEM/ODM生産を見るOEM/ODM生産のページへ

投稿日:2025年8月14日

Initial EMC/EMI Design: Key Points of Layout, Shielding, and Filters

Understanding EMC and EMI

💡 こうした調達・受発注の属人化、Newji one なら「ひとつの画面」で解決。見積依頼から発注・進捗・承認までAIが下支えします。
サービス資料を見る(無料)→

Electromagnetic Compatibility (EMC) and Electromagnetic Interference (EMI) are essential concepts in the field of electronics and electrical engineering.
They relate to the behavior and performance of electronic devices in the presence of electromagnetic fields.
EMC ensures that electronic components and systems function correctly without causing or being affected by EMI.

EMI refers to the disruption caused when electromagnetic fields affect electronic circuits or cables, potentially leading to malfunction or failure.
Understanding both concepts is crucial when designing electronic systems to meet regulatory standards and ensure proper operation.

The Importance of Proper Design

Achieving EMC in a design is critical to delivering reliable and robust electronic systems.
Poor design choices can lead to significant EMI issues, resulting in costly redesigns, failures in the field, and non-compliance with regulatory standards.
This section will explore some of the key factors in ensuring your system’s design minimizes EMI and maximizes EMC.

Layout Considerations

The layout of a printed circuit board (PCB) plays a vital role in achieving EMC.
A well-designed layout minimizes interference and ensures efficient signal transmission.

1. **Component Placement**: Place components that are sensitive to EMI away from those generating EMI.
Grouping compatible components together can shield sensitive parts and improve circuit performance.

2. **Signal Traces**: Short and direct signal paths reduce the risk of electromagnetic interference.
Avoid sharp turns in trace routing and use 45-degree angles where necessary to enhance signal integrity.

3. **Ground Plans**: An efficient grounding system acts as a shield against EMI.
Extend a continuous ground plane across the PCB, and ensure good connectivity to minimize ground loops.

Shielding Strategies

Shielding is a technique used to protect electronic circuits from external electromagnetic fields.
It involves enclosing a circuit or components in a conductive material to block interference.

1. **Material Selection**: The right shielding material depends on the frequency range of the EMI you are trying to block.
Common materials include copper, aluminum, and specialized conductive coatings.

2. **Enclosure Design**: Ensure all seams and openings in enclosures are minimized, as these can allow EMI penetration.
Use gaskets and conductive adhesives to seal joints effectively.

3. **Cable Shielding**: For cables, coaxial designs or twisted pair cables can be used, both of which help in reducing the influence of EMI on signals.

Filter Implementation

Filters play a vital role in preventing EMI from affecting electronic circuits.
They can be used to suppress both conducted and radiated interference by allowing only desired frequencies to pass through.

1. **Types of Filters**: Common types include low-pass, high-pass, band-pass, and notch filters.
The choice depends on the desired frequency range to be maintained or suppressed.

2. **Placement**: Strategic placement of filters at critical points helps in reducing interference.
For instance, placing filters near power entry points can prevent conducted EMI from entering the system.

3. **Component Quality**: Ensure high-quality components are used in filter design to maintain performance over time.
Compromising on quality may lead to filter failure, thus opening paths for EMI to affect the system.

Testing and Compliance

Testing for EMC and ensuring compliance with standards is a critical part of the design process.
Without this step, it is impossible to guarantee that the design will perform as required in real-world conditions.

Standards and Regulations

There are various international standards for EMC, such as the CISPR, IEC, and FCC regulations, that set the framework for compliance.
Adhering to these standards is not only crucial for legality but essential for marketing and deploying electronic products worldwide.

Testing Procedures

1. **Pre-compliance Testing**: Performing testing early in the design phase can catch potential EMC issues.
Use shielded rooms and specialized equipment to simulate real-world EMI scenarios.

2. **Simulations**: Computational Electromagnetic (CEM) simulations can predict EMI performance, enabling designers to make necessary adjustments before physical testing.

3. **Third-party Testing**: Performing tests at independent facilities can provide unbiased verification of compliance.
Many testing labs offer services that precisely measure EMI and EMC performance against standards.

Conclusion

The initial design for EMC/EMI involves careful consideration of layout, shielding, and filtering.
By addressing these areas effectively, designers can reduce the risk of EMI affecting their systems, ensure compliance with international standards, and deliver high-quality, reliable products.

Incorporating these design principles into the initial stages of a project minimizes the need for costly revisions and improves the chances of a successful product launch.
Investing time and resources in robust EMC/EMI design ultimately leads to better performance and reliability in electronic systems.

WHITE PAPER

この記事の理解を深める
無料ホワイトペーパーをプレゼント

製造業の現場で使える実務資料(PDF)を無料でお届けします。"こんな資料が届きます" ↓ 下のボタンからどうぞ。

FREE DOCUMENT — サービス資料(PDF・無料)

製造業の見積・受発注クラウド
「Newji one」とは

Newji one は、製造業の調達・受発注に特化したクラウド/AIエージェント。見積依頼・発注書作成・進捗管理・承認をひとつの画面に集約し、AIが比較と異常検知を担当。最後の「GO」だけ人が押す仕組みです。

  • 見積〜発注〜納期を一元管理。催促・転記のムダをゼロに
  • AIが相見積もり比較と異常検知。あなたは判断だけに集中
  • 取引先は「招待」で完全無料。自社コストだけで取引先ごとデジタル化

※ 取引先から招待された企業様は完全無料でご利用いただけます

NEWJI総研

購買・調達や設計・品質の実務を、
研修テキストと実務書式にまとめています。
無料サンプルで中身を確かめられます。

NEWJI総研の資料を見る

OEM/ODM 生産委託

アイデアはある。作れる工場が見つからない。
試作1個から量産まで、加工条件に合わせて最適提案します。
短納期・高精度案件もご相談ください。

加工可否を相談する

AI/DX支援

見積・発注、紙・FAX、品質記録など、
人に頼って回っている業務を、AIと仕組みで回る形に。
まずは無料でご相談ください。

AI/DX支援を見る

見積・発注クラウド Newji one

受発注が増えるほど、入力・確認・催促が重くなる。
受発注管理を“仕組み化“して、ミスと工数を削減しませんか。
見積・発注・納期まで一元管理できます。

機能を確認する

You cannot copy content of this page