Fundamentals of SOTIF (ISO21448), related standards, and application to ensuring safety of automated driving functions | newji
品質・加工の困りごとの相談

その不具合、
どこに頼むかから一緒に。

課題の整理と進行は newji、測定・解析・試作は専門の会社。見積のご提示までは無料です。

相談できることを見る技術課題の解決のページへ

投稿日:2024年12月20日

Fundamentals of SOTIF (ISO21448), related standards, and application to ensuring safety of automated driving functions

Understanding SOTIF and Its Importance

🛠 この記事のような品質・検査・規格の課題は、ご相談ください。規格の調べ物、仕入先への品質要求づくり、検査・試験先の手配まで一緒に進めます(相談は無料)。相談の例を見る →
相談する →

The Safety of the Intended Functionality, or SOTIF, is a vital concept in the realm of automated driving systems.
As vehicles become more advanced, ensuring the safety of their automated functions is paramount.
SOTIF aims to address potential hazards that aren’t caused by hardware failures, but by the vehicle’s intended functionality.
Understanding SOTIF is crucial to developing and implementing safe automated driving technologies.

Background of SOTIF

In the past, safety standards for automotive functions primarily focused on hardware issues, mechanical failures, or malfunctions in electronic components.
However, as the complexity of vehicle automation increases, new safety challenges arise.
Here, SOTIF enters the picture, focusing on scenarios where the intended function of a system may not achieve the desired safe state.

These scenarios may be due to the limitations of sensors, algorithms, or environmental conditions that the vehicle encounters.
The principal aim of SOTIF is to identify and mitigate safety risks that emerge from these functional insufficiencies without relating to any specific failures or system anomalies.

The ISO 21448 Standard

ISO 21448 is the international standard that specifically addresses SOTIF.
Published in 2019, it outlines a structured approach to identifying safety risks associated with the intended functionality of automated driving systems.

Key Aspects of ISO 21448

ISO 21448 extends the scope of traditional automotive safety standards.
It includes several critical processes:

1. **Scenario Identification and Analysis**:
– This involves identifying scenarios where the vehicle’s intended function might not perform safely.
– Scenarios may range from environmental changes to unexpected driver behavior.

2. **Risk Assessment**:
– Engineers must assess and categorize the risks associated with each scenario.
– Determining the probability and potential impact of risks is a crucial step.

3. **Validation and Verification**:
– The standard emphasizes the need for comprehensive testing.
– This includes both simulation-based exercises and real-world testing to ensure that all functions operate safely under various conditions.

4. **Monitoring and Feedback**:
– Continuous monitoring of system performance is essential for assessing ongoing compliance.
– Feedback mechanisms help in refining and improving the algorithms over time.

Related Standards and Their Relevance

While ISO 21448 specifically addresses SOTIF, other standards play a significant role in the broader context of automated driving safety.

ISO 26262

ISO 26262 deals primarily with functional safety of electrical and electronic systems within vehicles.
It focuses on preventing hazards due to system failures and establishes guidelines for designing, testing, and validating automotive systems.

Intersection and Integration

Both ISO 21448 and 26262 are crucial for ensuring comprehensive safety.
While ISO 26262 concerns failure prevention, ISO 21448 handles the challenges posed by system functionalities that might not behave as expected due to their limitations.
Effective integration of both standards helps create a robust safety framework.

Application in Ensuring Safety of Automated Driving Functions

Implementing SOTIF is not just a theoretical exercise; it’s a practical necessity for the deployment of automated driving systems.

Proactive Hazard Identification

By applying the methodologies outlined in ISO 21448, manufacturers can proactively identify hazards that may arise under different driving scenarios.
This proactive approach is fundamental to preventing accidents that stem from functional limitations rather than system failures.

Continuous Improvement of Systems

Automated driving technologies are under constant development.
Implementing SOTIF means setting up systems that allow for continuous improvement.
Through feedback loops and iterative testing, technologies are refined and optimized for greater safety.

Simulation and Real-World Testing

Both simulation and real-world testing are integral to SOTIF.
Simulations allow for safe testing of scenarios that would be impractical or risky in real life.
Meanwhile, real-world testing confirms that the vehicle’s systems perform safely in real traffic conditions.

Adapting to Diverse Environments

Automated vehicles must operate safely across varied environments, from busy urban streets to quiet rural roads.
SOTIF encourages consideration of diverse driving conditions during the development process, ensuring that automated functions are adaptable and resilient.

Conclusion

The SOTIF standard and ISO 21448 provide a comprehensive framework for ensuring the safety of automated driving functions.
As vehicles continue to evolve, the importance of addressing both functional safety and system reliability cannot be overstated.
By understanding and applying these standards, manufacturers can create safer, more reliable automated driving systems that can efficiently handle the complexities of modern transportation.

WHITE PAPER

この記事の理解を深める
無料ホワイトペーパーをプレゼント

製造業の現場で使える実務資料(PDF)を無料でお届けします。"こんな資料が届きます" ↓ 下のボタンからどうぞ。

AI 一次診断(無料・お名前の入力なし)

この症状の原因を、AIが分析します

材料・加工方法・条件と、起きている症状を書いてください。考えられる原因、まず確かめること、切り分け方、専門の会社に聞くことを AI が整理します。

1 日 3 回まで0 / 1,500 字

社外秘・機密情報・個人情報・図番など、公開できない情報は書かないでください。

AI の回答は可能性の整理で、原因を断定するものではありません。入力内容は AI 診断と改善のため 30 日間保存し、その後削除します(プライバシーポリシー)。

AI を使わずに直接相談する →

📄 取引先から受け取った仕様書の要求を、1 件ずつ一覧にします — 仕様書の要求事項一覧(無料・社数限定)

NEWJI総研

購買・調達や設計・品質の実務を、
研修テキストと実務書式にまとめています。
無料サンプルで中身を確かめられます。

NEWJI総研の資料を見る

OEM/ODM 生産委託

アイデアはある。作れる工場が見つからない。
試作1個から量産まで、加工条件に合わせて最適提案します。
短納期・高精度案件もご相談ください。

加工可否を相談する

AI/DX支援

見積・発注、紙・FAX、品質記録など、
人に頼って回っている業務を、AIと仕組みで回る形に。
まずは無料でご相談ください。

AI/DX支援を見る

見積・発注クラウド Newji one

受発注が増えるほど、入力・確認・催促が重くなる。
受発注管理を“仕組み化“して、ミスと工数を削減しませんか。
見積・発注・納期まで一元管理できます。

機能を確認する

You cannot copy content of this page