月間77,185名の
製造業ご担当者様が閲覧しています*

*2025年2月28日現在のGoogle Analyticsのデータより

投稿日:2025年3月16日

Mechanisms of dielectric breakdown/deterioration, measurement/diagnosis, and countermeasure technologies depending on the application

Understanding Dielectric Breakdown and Deterioration

Dielectric breakdown is a phenomenon observed in insulating materials when they are subjected to an electric field strong enough to cause the material to become conductive.
This sudden failure of insulation is critical in various applications, from power transmission systems to electronic devices.
Understanding the mechanisms leading to dielectric breakdown is essential for enhancing the durability and efficiency of these materials.

Dielectric deterioration, on the other hand, refers to the gradual decline in the insulating properties of a material over time.
Factors such as temperature, frequency of electrical stress, and environmental conditions contribute to this wear.
Both dielectric breakdown and deterioration are significant concerns in the electrical and electronics industry, and their study is vital for developing effective prevention strategies.

Mechanisms of Dielectric Breakdown

The process of dielectric breakdown involves several mechanisms, including thermal, electronic, and electrochemical breakdown.
Each of these mechanisms can occur based on the material type, usage conditions, and applied voltage levels.

Thermal breakdown is driven by the heat generated from electrical energy that causes the material to lose its insulating properties.
As the temperature increases, the material’s molecular structure becomes compromised, leading to a breakdown.
This type of breakdown is common in applications where high thermal stress is encountered, such as in transformers and high-voltage cables.

Electronic breakdown happens when the electric field applied across the material surpasses its dielectric strength, prompting electrons to gain energy and move freely, thereby turning the insulator conductive.
This breakdown mechanism is prominent in electronic components like capacitors and diodes where high voltages are frequently applied.

Electrochemical breakdown is less common but occurs in humid or wet conditions where chemical reactions facilitated by electric fields degrade the material.
This type of breakdown is often seen in outdoor power equipment and infrastructure exposed to harsh environmental elements.

Measuring and Diagnosing Dielectric Deterioration

The effective measurement and diagnosis of dielectric deterioration are crucial for mitigating potential failures in insulation systems.
Several techniques are utilized to assess the condition of dielectric materials and predict potential breakdowns before they occur.

Dielectric spectroscopy is a powerful diagnostic tool employed to measure the frequency response of a material’s dielectric properties.
By applying an AC voltage across the dielectric material, changes in its impedance can be monitored, providing insights into its condition and detecting early signs of deterioration.

Partial discharge testing is another critical method for assessing the condition of insulation.
Partial discharges are small electrical sparks that occur within the dielectric material, signifying imperfections or faults that could lead to breakdown.
Detecting these discharges early can help prevent complete breakdowns, thereby improving system reliability and safety.

Thermal imaging is also extensively used to monitor dielectric materials.
By capturing thermal profiles, it is possible to identify hotspots and abnormal temperature variations that might indicate areas of potential failure.

Countermeasures and Technologies for Prevention

Implementing effective countermeasure technologies is essential to extend the life of dielectric materials and prevent breakdowns.
The development of new materials with higher dielectric strengths and improved thermal resistance remains at the forefront of research.

Nanocomposite materials are emerging as promising solutions for enhancing dielectric durability.
By incorporating nanoparticles into traditional insulating materials, the resultant nanocomposites showcase superior electrical and thermal properties, reducing the likelihood of breakdown.

Polymer modification techniques can vastly improve the performance of dielectric materials.
Cross-linking and grafting can enhance the mechanical strength and resistance to environmental factors, significantly extending the lifespan of insulation.

Regular maintenance and condition monitoring are also pivotal in preventing dielectric breakdowns.
Through periodic inspection and testing, potential issues can be identified and addressed promptly, reducing the risk of catastrophic failures.

Furthermore, applying advanced protective coatings can help shield dielectric materials from harsh environmental conditions and chemical aggressors, thus preserving their insulating properties.

Applications and Impact of Dielectric Management

Dielectric management is pivotal across various industries, where the efficiency and reliability of electrical systems are paramount.
In the power generation and distribution sector, effectively managed dielectric materials ensure the uninterrupted flow of electricity, preventing outages and equipment damage.

In consumer electronics, maintaining the integrity of dielectric materials within circuitry is critical for device performance and safety.
Failures in these systems can result in costly recalls and safety hazards, highlighting the importance of robust dielectric management.

In aerospace and automotive applications, where reliability is crucial, dielectric breakdown prevention is critical for ensuring operational safety and efficiency.
The development of high-performance dielectric materials is integral to supporting the technological advancements in these fields.

Conclusion

Understanding and managing the mechanisms behind dielectric breakdown and deterioration is vital for improving the reliability and efficiency of electrical and electronic systems.
Through advanced diagnostic techniques and innovative material technologies, it is possible to anticipate and mitigate failures, ensuring the longevity and safety of these systems.

Continuous research and development in this area promise even more resilient and efficient dielectric solutions, supporting the evolving needs of various industries and enhancing their technological capabilities.

資料ダウンロード

QCD管理受発注クラウド「newji」は、受発注部門で必要なQCD管理全てを備えた、現場特化型兼クラウド型の今世紀最高の受発注管理システムとなります。

ユーザー登録

受発注業務の効率化だけでなく、システムを導入することで、コスト削減や製品・資材のステータス可視化のほか、属人化していた受発注情報の共有化による内部不正防止や統制にも役立ちます。

NEWJI DX

製造業に特化したデジタルトランスフォーメーション(DX)の実現を目指す請負開発型のコンサルティングサービスです。AI、iPaaS、および先端の技術を駆使して、製造プロセスの効率化、業務効率化、チームワーク強化、コスト削減、品質向上を実現します。このサービスは、製造業の課題を深く理解し、それに対する最適なデジタルソリューションを提供することで、企業が持続的な成長とイノベーションを達成できるようサポートします。

製造業ニュース解説

製造業、主に購買・調達部門にお勤めの方々に向けた情報を配信しております。
新任の方やベテランの方、管理職を対象とした幅広いコンテンツをご用意しております。

お問い合わせ

コストダウンが利益に直結する術だと理解していても、なかなか前に進めることができない状況。そんな時は、newjiのコストダウン自動化機能で大きく利益貢献しよう!
(β版非公開)

You cannot copy content of this page