Methods for preventing loosening and evaluating reliability to improve the fatigue strength of bolted fasteners | newji
部品・製品の製作

その部品・製品、
作れる会社を探します。

図面からの部品の手配、試作、OEM・ODM。協力会社の中から合う会社を探して進めます。

OEM/ODM生産を見るOEM/ODM生産のページへ

投稿日:2025年7月6日

Methods for preventing loosening and evaluating reliability to improve the fatigue strength of bolted fasteners

Introduction to Fatigue Strength in Bolted Fasteners

💡 こうした調達・受発注の属人化、Newji one なら「ひとつの画面」で解決。見積依頼から発注・進捗・承認までAIが下支えします。
サービス資料を見る(無料)→

Bolted fasteners are crucial components in machinery, vehicles, and structures that require the joining of parts.
They provide the necessary stability and support needed to withstand operational stresses.
However, over time, even the strongest bolted connections can experience fatigue, leading to loosening and potential failure.
Improving the fatigue strength of bolted fasteners is, therefore, essential for ensuring the safety and reliability of various systems.

Understanding Fatigue in Bolted Connections

Fatigue refers to the weakening of a material caused by repeatedly applied loads, which can lead to failure even when the stresses are below the material’s ultimate tensile strength.
In bolted connections, fatigue is typically caused by cyclic loads.
These loads can arise from vibrations, thermal expansion or contraction, and operational movements.
The cyclical nature of these forces can eventually cause the bolt to lose its integrity, demonstrating visible signs of wear and tear.

The Importance of Preventing Loosening

Loosening is a common concern with bolted connections experiencing fatigue.
This can lead to compromised joints, increasing the likelihood of accidents or equipment breakdown.
Preventing loosening of bolts not only prolongs the lifespan of the fasteners but also enhances overall safety.
Strategies to prevent loosening are varied and often provide a multi-faceted approach for optimal results.

Methods for Preventing Loosening

There are several effective methods to prevent the loosening of bolted fasteners and improve fatigue strength.
Each method addresses specific factors that contribute to loosening and fatigue.

1. Proper Torqueing Techniques

Applying the correct torque to a bolt is crucial for maintaining its tension and preventing loosening.
Under-torqueing or over-torqueing can both lead to undesirable outcomes, including premature failure or bolt breakage.
Employing torque wrenches and following the manufacturer’s specifications ensures appropriate preload is applied, reducing the risk of fatigue.

2. Use of Locking Mechanisms

Locking mechanisms play an important role in preventing bolt loosening.
Components such as lock washers, lock nuts, and thread-locking adhesives increase the friction between the bolt threads and the mating surface.
This added friction helps maintain the clamping force and resists vibration-induced loosening.

3. Design Modifications

Sometimes, the design of the bolted connection itself can be modified to improve fatigue resistance.
Design strategies might include increasing the bolt diameter, changing the bolt material to a more fatigue-resistant substance, or using a multi-bolt configuration to distribute loads more evenly.
These modifications can significantly enhance the fatigue strength of the connection.

4. Surface Treatments

Applying surface treatments to bolts and mating surfaces can also help minimize loosening.
Treatments such as galvanization, coating with anti-corrosive materials, or applying a layer of lubricant can reduce wear and tear.
These treatments also protect the fastener from environmental elements that might exacerbate fatigue.

Evaluating Reliability of Bolted Connections

Evaluating the reliability of bolted connections is a vital component of maintaining the safety and effectiveness of any system.
There are various tests and inspections employed to ascertain the reliability and condition of bolts.

1. Regular Inspections

Routine inspections should be conducted to identify any signs of bolt fatigue or loosening.
Visual inspections can reveal obvious signs of wear, whereas more detailed inspections might involve non-destructive testing techniques such as ultrasonic testing or magnetic particle inspection.

2. Fatigue Testing

Fatigue testing is essential to assess how a bolted connection behaves under cyclic loads over time.
This testing method involves subjecting a bolted joint to repeated loads until failure occurs.
Data from fatigue tests can provide insights into the longevity and reliability of the bolted connection, guiding informed decisions about maintenance and part replacement.

3. Load Testing

Load testing involves subjecting the bolted joints to operational loads to monitor their performance under stress.
This testing evaluates whether the fasteners can maintain their integrity under real-world conditions.
Results from load tests help in understanding whether the current bolted connection design is adequate or requires modification.

4. Analytical Modeling

Employing analytical models to simulate the behavior of bolted connections under various conditions can preemptively identify potential failure points.
Models can incorporate numerous factors such as material properties, load distribution, and environmental influences.
These models help engineers predict how a bolted joint will perform and what improvements may need to be implemented.

Conclusion

Improving the fatigue strength of bolted fasteners is a complex process that requires a multifaceted approach.
By employing proper torqueing techniques, locking mechanisms, and design modifications, the risk of loosening can be greatly minimized.
Regular inspections and testing methods provide an accurate assessment of a bolted joint’s reliability, ensuring that safety is never compromised.
Through these combined efforts, bolted fasteners can maintain their integrity under cyclic loads, enhancing the overall reliability and lifespan of machinery and structures.

WHITE PAPER

この記事の理解を深める
無料ホワイトペーパーをプレゼント

製造業の現場で使える実務資料(PDF)を無料でお届けします。"こんな資料が届きます" ↓ 下のボタンからどうぞ。

FREE DOCUMENT — サービス資料(PDF・無料)

製造業の見積・受発注クラウド
「Newji one」とは

Newji one は、製造業の調達・受発注に特化したクラウド/AIエージェント。見積依頼・発注書作成・進捗管理・承認をひとつの画面に集約し、AIが比較と異常検知を担当。最後の「GO」だけ人が押す仕組みです。

  • 見積〜発注〜納期を一元管理。催促・転記のムダをゼロに
  • AIが相見積もり比較と異常検知。あなたは判断だけに集中
  • 取引先は「招待」で完全無料。自社コストだけで取引先ごとデジタル化

※ 取引先から招待された企業様は完全無料でご利用いただけます

NEWJI総研

購買・調達や設計・品質の実務を、
研修テキストと実務書式にまとめています。
無料サンプルで中身を確かめられます。

NEWJI総研の資料を見る

OEM/ODM 生産委託

アイデアはある。作れる工場が見つからない。
試作1個から量産まで、加工条件に合わせて最適提案します。
短納期・高精度案件もご相談ください。

加工可否を相談する

AI/DX支援

見積・発注、紙・FAX、品質記録など、
人に頼って回っている業務を、AIと仕組みで回る形に。
まずは無料でご相談ください。

AI/DX支援を見る

見積・発注クラウド Newji one

受発注が増えるほど、入力・確認・催促が重くなる。
受発注管理を“仕組み化“して、ミスと工数を削減しませんか。
見積・発注・納期まで一元管理できます。

機能を確認する

You cannot copy content of this page